1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MM1 InstaAct Wiring

Discussion in 'Fisher Engineering Discussion' started by cpowers, Sep 18, 2010.

  1. cpowers

    cpowers Junior Member
    Messages: 1

    Hello, I purchased a MM1 with a InstaAct pump, unfortunately it has 3 plugs and the truck I want to put it on is only a 2 plug set up with (12 pin and +/-). Is there a wiring harness to remove the 3 plug set up on the plow and change it to a 2 plug (12 pin and +/-) ? Btw the truck is a 1997 chevrolet with 4 bulb composite headlamps. Thanks in Advance. -Craig
  2. NHresident

    NHresident Senior Member
    Messages: 304

  3. buddymanzpop

    buddymanzpop Senior Member
    Messages: 603

    Go to the section where you can post items for sale and place a posting to swap your three plug set up for the older two plug set up, I'm sure there is someone out there with a two plug that needs to convert to a three plug.
  4. NHresident

    NHresident Senior Member
    Messages: 304

    If u wanna swap I can do that aswell.I have a 2 plug setup for ur 97 GM
  5. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,525

    Also have 2 plug harnesses in great shape.