1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

minute mount kills battery

Discussion in 'Commercial Snow Removal' started by White gold, Nov 12, 2003.

  1. White gold

    White gold Junior Member
    Messages: 5

    Just installed a fisher minute mount on my 90 chevy 2500 the plow was a used setup off a 1999 2500 chevy it has the isolation module set up. Everything works ok but the battery dies if I leave the plow plugged into the truck over nite even if i shut the joy stick off. Any Ideas? Thanks new to the board and the minute mount use to plowing with a old style fisher:)
  2. Brian Simmons

    Brian Simmons PlowSite.com - Sponsor
    Messages: 196

    Normally the only way the isolation system will kill the battery is if the switched accessory wire under the dash is wired to a straight 12volts instead of a switched 12volts. Recheck where you have it hooked up.
  3. White gold

    White gold Junior Member
    Messages: 5

    Thanks, I think you may be right I'll check on monday :)
  4. White gold

    White gold Junior Member
    Messages: 5

    Many thanks you were exactally right that fixed the problem:D :D :D