1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Minute Mount 1 V plow issues

Discussion in 'Fisher Engineering Discussion' started by Diesel_brad, Jan 2, 2011.

  1. Diesel_brad

    Diesel_brad Senior Member
    Messages: 208

    Ok. My brother has a Minute mount 1 V plow mounted on his 94 F250. Last year the blade started acting up. When set as a straight blade the wings do not move together, one is always faster.
    Say the blade is straight across, and you want to angle it to the left. The left wing comes towards the truck fine but the right wing is slow. then when the left wing gets all the way back, the right wing stops and starts to drift back. It works the same way when angling to the right. The wing coming closer to the truck works fine, but the wing going away from the truck is slow then stops and drifts.

    he just did a fluid change and cleaning the filters in hopes of fixing it but it does the same thing. Any ideas?
  2. Backlash63

    Backlash63 Junior Member
    from ny
    Messages: 11

    what did you guys use for fluid? try something cold weather if your not using fisher oil already.

    If the problem is always with the right wing check the grounds first.

    if the coils are the same try swapping them to see if it makes the left wing act up

    if that doesn't help then remove and clean the valve for the right wing . I am willing to bet the problem is in one of those orifices.
  3. Diesel_brad

    Diesel_brad Senior Member
    Messages: 208

    We used Fisher fluid.

    BOTH wings are slow, depending on which side your are turning to.
  4. Diesel_brad

    Diesel_brad Senior Member
    Messages: 208

    Any ideas?
  5. Diesel_brad

    Diesel_brad Senior Member
    Messages: 208

    Ok. my brother was checking the plugs toning and now the right wing will not move.
    HELP snow is coming toningt
  6. jaybird

    jaybird Member
    Messages: 40

    2 plug plow?
  7. Diesel_brad

    Diesel_brad Senior Member
    Messages: 208

    Yes. 2 plug

    We figured it out tonight. It had 3 seperate issues

    1. No right wing function = Bad connection at 12 pin plug
    2. No straight blade mode = Black wire in controller was backed out of connector
    3. lazy wing when using as straight blade = bad control valve on solinoid S5