1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers plow creeping?

Discussion in 'Commercial Snow Removal' started by CrewCut, Jan 26, 2001.

  1. CrewCut

    CrewCut Junior Member
    Messages: 5

    This morning I go out to put the plow on the e-60 with an 8ft plow and the darn thing won't go down, so I found that the o-ring on the A-cartridge was split so I replaced it with a new and that night it busted again. I then replaced that o-ring will a cat o-ring and that seems to hold it, but down when I drive down the street the plow is creeping down slowly, but when I stop and put it down and shut it off then start it back up it stops the creeping, any ideas?
  2. finnegan

    finnegan Senior Member
    Messages: 313

    check that coil and see if there is any stray voltage going to it but if you blew 2 o rings sounds really serious to me i'd ask chuck real nice and maybe he'd help you....