1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers Model E46???Need some help plzzz

Discussion in 'Meyer / Diamond Products Discussion' started by 1968Chevelle300, Oct 11, 2007.

  1. 1968Chevelle300

    1968Chevelle300 Junior Member
    Messages: 1

    hello im new here i just joined i have a question i just had a Meyers E46 plow mounted on my Ford Bronco to plow with and make money in the winter well i dont have a wiring diagram for this plow so if someone can help me out that would be great thanks alot

  2. jlcf

    jlcf Junior Member
    Messages: 17

    What do you need to know?
  3. 04sd

    04sd Senior Member
    from pa
    Messages: 266

    Doesn't get much simpler than an E46. A single 3-way toggle switch. Power to the solenoid makes the motor/pump run and the plow raises. Throw the switch the other way and you get power to the A coil (the only one on the pump) and the plow drops. The service manual has diagrams if you want them....
    http://www.meyerproducts.com/upload/forms/1-562 R16.pdf
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Heres the best pic I have of the old E46 wiring...hope it helps.

    New Picture 3.JPG