1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyers E-47 weep hole leak

Discussion in 'Commercial Snow Removal' started by Foxfire, Oct 2, 2003.

  1. Foxfire

    Foxfire Senior Member
    Messages: 153

    Hi everyone, I had a bad pump shaft seal, got it changed but now my blade wont go all the way up, moves real slow. can anyone offer any help..... Thanks:confused:
  2. wyldman

    wyldman Member
    Messages: 3,265

    Are you sure it's full of fluid ? Maybe trapped air ?
  3. szorno

    szorno Senior Member
    Messages: 308

    Fill it up and then lift the lifting arm by hand slowly a few times. The old meyer manual says that is a bleeding process. Helps anytime you run the pump low or dry.:nod:
  4. Santo

    Santo Banned
    Messages: 255

    Do you have the blade on? May have to bleed that too.
  5. Foxfire

    Foxfire Senior Member
    Messages: 153

    Weep hole leak

    Found the problem, When putting the pump back together I got the seal twisted & the B valve was bad, now I have a bad ram seal. Does anyone know how much a ram seal costs ? I would like to thank everyone for their help........