1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers controller

Discussion in 'Meyer / Diamond Products Discussion' started by HowdieBoss, Dec 21, 2015.

  1. HowdieBoss

    HowdieBoss Junior Member
    Messages: 1

    After a couple Hrs of plowing the controller would not operate the blade and the red lighting bolt would light up while the truck is in drive. Meyers oem touchpad controller. Put the truck in park reset the controller and everything would work, put it in drive and controller stopped working.
  2. Snow Commandor

    Snow Commandor Senior Member
    from 07666
    Messages: 443

    Sounds like maybe your fused power from the ignition is somehow getting shorted out when you shift into drive.
  3. Fourtrax250R

    Fourtrax250R Senior Member
    Messages: 109

    check the ground for the touch pad, make sure its clean and making good contact. it would be the orange wire coming out of the harness somewhere under the hood, near the white signal wire going to your under hood solenoid.