1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyers 6.5st commanche mount adapting to a YJ wrangler

Discussion in 'Jeeps' started by Premierplowing, Nov 13, 2009.

  1. Premierplowing

    Premierplowing Member
    Messages: 40

    I recently bought a 95 wrangler at a steal and will be mounting my Meyer 6.5st that has a commanche mount on it....I know that its not the correct mount buy i've measured the frame rails and hypothetically it should be able to make it work. Anyone know if its been done b4 or should I just sell the existing mount and get the right one?. The plow is less than 6 mo's old and i paid 40% of a new one
    Thanks for any input
  2. watchamakalit

    watchamakalit Member
    Messages: 65

    I am not much help on the swap but if you decide to sell that comanche mount, let me know I am looking for one.
  3. flykelley

    flykelley 2000 Club Member
    Messages: 2,127

    You will have to fab up a new one, I judt had that done last week. Finding a mount for a YJ is like hitting the lotto and getting hit by lighting in the same day, chances are very small you will find a YJ mount.

    Good Luck Mike
  4. Premierplowing

    Premierplowing Member
    Messages: 40

    From the looks of it I should be able to make the Cherokee mount work with the YJ...the outside dimension of the framerails is 34 1/2" and the inside dimensions of the Cherokee mount are 34 1/2 as well, I may have to cut the mount a bit to get the mount up high enough, but I should be able to just drill some holes and bolt it up, no?