Meyer lot pro no power to the motor from the controller

Discussion in 'Meyer / Diamond Products Discussion' started by corey brett, Feb 11, 2020.

  1. corey brett

    corey brett Junior Member
    Messages: 1

    Blade is up and to the left , I replaced the wiring harness on the blade side and the solenoid but still no power to the pump from the controller,I tried another controller and the same thing .but if you cross out the solenoid from the power to the small white wire it will turn left and right
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 13,558

    Test light the signal wire on the solenoid while operating u l or r a d you should see power, then ck the main pos out on the solenoid to pump motor