1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer e60 c valve

Discussion in 'Meyer / Diamond Products Discussion' started by Rob79, Sep 13, 2009.

  1. Rob79

    Rob79 Member
    from PA
    Messages: 35

    I need to replace the e60 c valve. I went to take it off and it snapped. How does the solenoid come off? The nut snapped and I can't seem to remove it. Also what is the difference between the blocks? Mine has both couplers on top, I noticed some have one coupler on the side. Are these parts the same? Thanks
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239


    if the nut is snapped off the coil should slide right off .unless the valve stem is swelled from a pressure spike from a impact .:salute: you should be able to pry it off with a pair of channel locks on the coil carefully and use a screw driver to lift up against the pliers .
    Last edited: Sep 13, 2009