1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

MEYER E47 pump motor

Discussion in 'Meyer / Diamond Products Discussion' started by kansasKTS, Dec 25, 2008.

  1. kansasKTS

    kansasKTS Junior Member
    Messages: 3

    Please help! I Just put a new motor on my E47 pump i pushed for about 5 hours and it burned up on me. When i removed the motor there was oil under it on top op the pump, not sure if it was just the grease in between there got hot or if the pump leaked in there. Are the e47's to small to plow for long times with? think you for any help.
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    You could need a new pump seal.

    Did you install a aftermarket motor?
  3. kansasKTS

    kansasKTS Junior Member
    Messages: 3

    Yeah it is a aftermarket motor. i got from a local auto electric shop.
  4. MileHigh

    MileHigh PlowSite.com Addict
    Messages: 1,827

    my e-47 has plowed for over 18 hours straight...without a problem, several times.

    I just got my pump rebuilt for $260 and It works better than ever.
  5. sefh

    sefh Senior Member
    Messages: 439

    Go to Angelos and order a OEM motor for it. The aftermarkets don't hold up sometimes. Save yourself a headache.
  6. kansasKTS

    kansasKTS Junior Member
    Messages: 3

    ok thinks for the help. I will order a meyer OEM motor.