1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer E47 joystick controller wiring question

Discussion in 'Commercial Snow Removal' started by sefuller, Nov 9, 2002.

  1. sefuller

    sefuller Junior Member
    Messages: 6

    I am wiring a plow I bought used, and the previous owner clipped some of the wires for the controller. I have a white and black that I am not sure where to go with. I know one goes to switched ignition and one to the solenoid, but I don't know which one goes where. Can anyone point me in the right direction? I looked at Chuck's wiring diagram, but the ends are cut off my wires, and the diagram is not color coded for the two I need.
  2. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    If you have a standard joystick controller you hook the Black to Key on power and the White to the Solenoid.

    Jerre--- P.s. in the shop tommorow about 10:00 am eastern time. 814-898-2171 if questions.