1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer E 47 wont go up

Discussion in 'Meyer / Diamond Products Discussion' started by tuna, Jan 15, 2008.

  1. tuna

    tuna Senior Member
    Messages: 488

    Been having trouble lately holding right angle keeps coming left .Now when I try to lift the blade it turns left.it is an older unit with seperate joysticks for lift and angle.
  2. SnowLane

    SnowLane Senior Member
    Messages: 127

    It sounds like you have a bad "B" coil or "B" valve. It is the one with the red wire. If it does not work the plow will angle left instead of raising.
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Not holding to the right could be a defective C valve or the sealing rings on the C valve.

    Angling left instead of raising is a B valve, B coil or wiring to the B coil problem.

    If you search here in the Meyer forum you'll find plenty of info on both of these common problems and the diagnosis that goes with them.