1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer E-47 Rebuild help

Discussion in 'Meyer / Diamond Products Discussion' started by tsmith, Nov 8, 2008.

  1. tsmith

    tsmith Senior Member
    Messages: 255

    I was working out some bugs in my E-47 pump and broke off the stud on the B valve. I got the valve fixed with the welder, but in doing some searching I came across this page on rebuilding an E-47, this is the first page, I think there are 10 total. Thought it might help somebody out there. http://www.smithbrothersservices.com/meyer_E-47-pump-rebuild.html
  2. Milwaukee

    Milwaukee 2000 Club Member
    Messages: 2,180

    That is very helpful and see this guy use fluid film.

    That be great since I have 2 E47 pumps.

    What it be helpful if he show wire diagram to hook E47 on truck that don't have wire harness.
  3. syzer

    syzer Member
    Messages: 95

    How do you guys check the output pressure when you are finished with the rebuild?