1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Meyer Controller Problem. "Float" Light

Discussion in 'Meyer / Diamond Products Discussion' started by PGHplowguy, Nov 12, 2014.

  1. PGHplowguy

    PGHplowguy Senior Member
    Messages: 102

    Hey all,

    I have a Meyer E57 pump/controller. Everything is hooked up correctly (I think (wires)). It goes left and right fine. The pump will raise fine. But it will not go back down. When I hit down the green float light comes on. Some times it blinks. I had this problem years ago and I remember it was a simple fix without getting new parts. I just can't remember what the hell I did.

    3 wires coming off the motor. green, black and red.
    3 wires from the truck. green, black and white.

    Thanks for the help.
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,681

    Check A coil for power/magnetism. Should be black wire on the pump and smaller of the 3 coils.