1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

meyer 47 won't go down

Discussion in 'Meyer / Diamond Products Discussion' started by mad69snow, Jan 31, 2008.

  1. mad69snow

    mad69snow Junior Member
    Messages: 8

    pump was working fine hooked it up rasied it now it will not go down!!!!!!!!!!!!!!!:cry::confused::realmad:
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    Check the A coil (Black wire) is it getting power? is it magnetized? is the valve stuck. Is your control working properly?
  3. KGRlandscapeing

    KGRlandscapeing 2000 Club Member
    Messages: 2,660

    is the plow on it? no weight it wont go down if not A coil and or a valve its in the back towards the bottom on the 47s
  4. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

    yup yup a (black) coil or valve!!
  5. sefh

    sefh Senior Member
    Messages: 439

    Make sure that your controller or toggles switches are working and that there is a plow on the front or some kind of weight.