1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

marker and turn sigs don't

Discussion in 'Fisher Engineering Discussion' started by 9 foot, Feb 29, 2012.

  1. 9 foot

    9 foot Junior Member
    from canada
    Messages: 1

    I have a f 350 with a fisher kit and have no marker or turn signals when it's all plugged in it also runs really rough when Iplow with it but when I remove the blade there's no problem
    I think it's in the iso module [being a sort] but not sure also if it's the module were can Iget one pn 26134 rev1 it's a 06 ford 350

    i think it's in
  2. Kopper10

    Kopper10 Sponsor
    Messages: 50

    You might want to check the park and turn wires (I think they are brown, grey and purple) where they connect into the vehicle park and turn circuits for power. It might be that area instead of your module.