1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

lowering problem

Discussion in 'Residential Snow Removal' started by mark04, Dec 13, 2004.

  1. mark04

    mark04 Junior Member
    from pa.
    Messages: 4

    Hello folks,well after a nice fall here in Pa. winter has come. This morning I hung my plow by the truck with care. Tonite I was checking things out and found out that my blade will lower abit at a time! Cant tell why? any ideas? Never had a Meyers do this before lucky I guess. Thanks.
  2. wickedcarpenter

    wickedcarpenter Member
    Messages: 36


    Sounds like a bad contact on the joy stick.Easy fix. Just clean it off.
    Good luck.
  3. I had thw same problem with my E60 Meyers but I had a touch pad control. It would lower but real slow. I cleaned out the pump and could not find anything wrong there, checked the solinoids no proble, everything else worked great. I used it as a excuse to rplace my old well worn Meyers for a Blizzard.