1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Installed New Cross Over Relief Meyers e-57

Discussion in 'Truck & Equipment Repair' started by don1952, Dec 28, 2011.

  1. don1952

    don1952 Junior Member
    Messages: 11

    Installed a new crossover relief valve Meyers new style, (15974) have e-57 with switches. Seem like after installation of the 15974, plow goes up and down no problem

    Already have replaced couplers(Pin Type)
    New Hose
    C valve and c valve coil
    welded blocks on plow.

    Can hear pump motor running

    Seem when I hit the left or right switch plow angles to the left and get stuck at that position. Pressure is still being built up at couplers need to take hose off at ram to disconnect couplers.

    removed all of old cross over valve parts.

    I am stuck at this point and getting ready to toss this e057

    any suggestions or thoughts


    Last edited: Dec 28, 2011
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Ever bother to check for power and magnetism at the C coil?