1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

hub removal

Discussion in 'Chevy Trucks' started by ahoron, Dec 26, 2009.

  1. ahoron

    ahoron Senior Member
    from here
    Messages: 422

    Trying to remove the axle shaft from the hub on 02 sierra. Rusted on tried hammering and heating with torch no go. any ideas? al;so tried soaking in wd-40 and broke a puller
    Last edited: Dec 26, 2009
  2. ticki2

    ticki2 Senior Member
    from NH
    Messages: 175

    What are you trying to do , remove the hub bearing , or the axle shaft ?. Also what have you done so far ?
  3. sweetk30

    sweetk30 PlowSite.com Addict
    Messages: 1,588

    some times thay get frozen in the hub. only ever had 2-3 do it on me in 10 years.

    prob have to buy new c/v shaft and wheel bearing / hub unit.

    and when i have them apart i coat them in never seize.

    also here a good wheel bearing / hub removale setup.

    wheel bearing / hub removal on rust belt trucks.

    remove 4 bolts 3/4 of the way.

    then take air hammer with center punch bit or the lisle tools bit made for this.

    hammer on each bolt evenly and work it out.


    i have one of these and love it to death. makes removale much much faster and dosnt hurt the bolt heads yet for me.
    Last edited: Dec 26, 2009