1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

How to change patterns in mini legend?

Discussion in 'Strobe Lighting' started by Mark13, Dec 26, 2010.

  1. Mark13

    Mark13 PlowSite Fanatic
    Messages: 5,794

    I've got a Federal Signal Mini Legend on my truck and can't figure out how to change patterns on it. I've got the digital controller that comes with it and it's pre programmed for 3 patters, I'm curious how to add more to it? It has the Off/1/2/3 switch on the controller but it has no effect on the patterns and works in the off position also.

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Mark there should be a pin inside the bar that needs to be "shorted" for a second to allow the pattern to change.