Snow Plowing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello,

Trying to determine if there is any adjustment for the high / low range selector on a C9700 H Holder tractor. Low range works fine, difficulty getting into high range and when it does will pop into neutral on a down grade.
This is the T handle selector on floor to the right of seat.

Would appreciate any pointers on adjustment or what to check.

Thanks
 

·
PlowSite.com Veteran
Joined
·
724 Posts
Hello,

Trying to determine if there is any adjustment for the high / low range selector on a C9700 H Holder tractor. Low range works fine, difficulty getting into high range and when it does will pop into neutral on a down grade.
This is the T handle selector on floor to the right of seat.

Would appreciate any pointers on adjustment or what to check.

Thanks
it sounds expensive.. after reading the operators manual pp64-70 the possibilities are endless. There has to be a English translation of a German repair manual somewhere on the internet. Seems to me that you will need a Swiss watch repairman to turn the t handle a micro turn to the left or right on the selector arm
 
1 - 2 of 2 Posts
Top