1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Hitch/backup light Design II

Discussion in 'Strobe Lighting' started by TJS, Jun 4, 2012.

  1. TJS

    TJS PlowSite.com Addict
    Messages: 1,440

    Take the link in my signature for the original build.

    After getting the flat bed done I needed to reconfigure my backup hitch light assembly. The trailer plug mount was now gone cause that was mounted under the factory bumper. I mounted it on the hitch assy. I also added a little more protection to my hitch light assy. I also added a backup alarm. I then made the box to house the relay for the backup lights.. So I tiged up thisall alum. box and made a cover all out of alum. It is now sealed with some silycone and screws down nice and tight. I have also since painted the class 5 receiver.




  2. Santry426

    Santry426 Senior Member
    Messages: 419

    That thing is sweet !