[Mike t Caselli]

Ii have an older hiniker straight blade plow. Recently it stopped working. Checked the motor and it's working replaced the solenoid still not working so I replaced the controller still nothing. Can anyone help.

 

[Hydromaster]

Does the motor run when you go to lift it or side to side

And is the reservoir full

If the motor ran the old solenoid was good
When you replace the solenoid did you hook it up exactly the same way as the old one

 

[Hydromaster]

#

 

[Hydromaster]

If The wires got moved on the pump when you were working on it here is a pic that shows which wire goes in what spot

And is your plug in good condition ( bent pins or pushed back sockets and firmly pushed together