1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Help pro plus wont move

Discussion in 'Western Plows Discussion' started by fireboy6413, Dec 26, 2010.

  1. fireboy6413

    fireboy6413 Senior Member
    Messages: 396

    All the sudden my 8.6 ultramount pro plus wont move left to right nor up, it will go down but thats it, also when I try to move the blade by hand its very stiff
  2. fireboy6413

    fireboy6413 Senior Member
    Messages: 396

    update I hear the solenoid kicking in, but dont hear the put
  3. clark lawn

    clark lawn PlowSite.com Addict
    from NE ohio
    Messages: 1,233

    what is the "put" that you dont hear? does the motor run?
  4. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    check to see if you have power to the S2, and S3 valves
    Check the black/orange wire (ground) to make it is clean on the solenoid and tight on the small terminal, and also on the plow side. This also connects to the S valves
  5. Tony350

    Tony350 Senior Member
    Messages: 546

    I would almost bet it is your solenoid. Try jumping the bib terminals on your solenoid if the motor runs when you jump it then you need a new one.