1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

help identifying plow hydraulic system

Discussion in 'Residential Snow Removal' started by not sure, Jan 17, 2014.

  1. not sure

    not sure Junior Member
    Messages: 19

    i assembled the plow set up from the junkyard and local sources so i dont know the specifics of the components. i added a second power steering pump from a dodge intrepid. had a custom reservoir made for on the fender. i have a mechanical spool valve on a custom bracket on the inner fender well. it has small levers with long rods that run inside the cab with knobs you push or pull. i need to know what this is called and a little info on them. it works fantastic and everybody asks about it. i can get pics if needed. this set up is on a s10 blazer and uses a custom carriage i made and a meyer blade for a jeep. thanks
  2. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 9,883

    Was it off of a Dodge?
    If so it's probably a Meyer set up.
  3. not sure

    not sure Junior Member
    Messages: 19

    the control valve was on @ 70 f250 in the junkyard