1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

help identifying blade

Discussion in 'Residential Snow Removal' started by jkmartin, Jul 27, 2009.

  1. jkmartin

    jkmartin Junior Member
    from gta
    Messages: 1

    Hello all, a farmer gave me this blade but I have no idea what brand it is.
    I'd like to mount in on my 93 f150 4x4 v8 but have no idea where to start.
    The blade is 7.5 ft wide. The distance between the mounting hole is 16 inches.
    I'm just north of toronto if that means anything.
    Any help would be appreciated. thx.



  2. YardMedic

    YardMedic PlowSite.com Addict
    Messages: 1,266


    Not an expert, but it looks like it might be a Meyer blade.
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    It's an ST-7.5 Meyer with the old Jeep style narrow A-frame.
  4. Mark13

    Mark13 PlowSite Fanatic
    Messages: 5,794

    Only you'd know that part. :rolleyes:

    x3 on a Meyer.
  5. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    B&B's right on the money (as usual) IMO you have spent as much time as that unit is worth already unless you plan to put it on a old jeep. If thats all you have the cost of all the parts to resurrect that into a usable plow would far exceed the cost of what you could buy a good used complete unit.