1. Podcast: Make Equipment Financing Work For Your Business
    The spring season is here, and if you’re a lawn care or landscape business owner planning to add or upgrade new equipment to your fleet, you’ll want to listen to Turf’s recent conversation with John Deere Financial about options in the market. Click here to listen
    Dismiss Notice

help! e47 won't turn right

Discussion in 'Meyer / Diamond Products Discussion' started by gooface, Feb 21, 2020.

  1. gooface

    gooface Junior Member
    Messages: 2

    Hello, looking for some help. Our e47 plow was working fine. It started acting up where it wouldn't turn right until you hit the joystick 5 or 6 times. Now it won't turn right at all. Goes up and down fine and to the left fine. Has new motor, new oil, new hose and coupler upgrade kit. Still won't turn right. If you try to turn right, the dash light dim like it is stuck or shorting somewhere. Any ideas?
     
  2. samcarpen

    samcarpen Member
    Messages: 69

    C-valve angles plow to the right, it's under the green wire coil. Check for magnetism at the coil when you try to angle plow to the right. If you have magnetism, try removing coil. If coil is difficult to remove, C-valve body may be swollen causing it to jam. I've also experienced new ball style connectors being defective out of the box.
     
  3. OP
    OP
    gooface

    gooface Junior Member
    Messages: 2

    Hi and thanks for the input! The new connectors are pin type. Checked for magnetism and working ok. Took the valve out and tested right on the battery. Calve opens and closes every time. When you push the lever you can hear the pump and it is trying to move the blade but it's like it is at the stops already?
     
  4. samcarpen

    samcarpen Member
    Messages: 69

    Blade could be binding. Try hooking angle cylinder hoses together and manually angling blade. You should be able to angle it left and right, stop to stop.