Snow Plowing Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
i just bought a mm1 plow just installed every thing it was working fine for about 5 mins so now it doesnt the fishstick comes on checked all the grounds on the plow side and truck side hold the fishstick to raise and i tap on the motor it comes on then it goes off the guy i bought it from said he replaced the motor the solinoid clicks i havent tried hooking jumper cables to the motor to the truck yet i am going to replace the motor
 

·
Registered
Joined
·
1,593 Posts
Welcome to the site. Before you replace the motor check to see you have power in and out of the solenoids and the grounds work all the way back to the battery. You could bypass the ground with a direct connection of jumper cables from motor to ground lug of battery. If not, try @cwren2472
 

·
Registered
Joined
·
14,458 Posts
1 - 8 of 8 Posts
Top