1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

headlight adj on a unimount

Discussion in 'Western Plows Discussion' started by captbo, Feb 2, 2010.

  1. captbo

    captbo Senior Member
    Messages: 112

    My headlights shine too high and before I break something trying to adjust them can some one tell me if there is a nut inside the lamp house as when I turn the pass side nut the whole lamp turns, The drivers side seem to work just by loosening the nut and sliding it down ,,,,,, buy like most things in my life its half screwed up
  2. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    No nut....Just a carriage bolt inside the housing with a bolt that tighten it up outside the housing
  3. captbo

    captbo Senior Member
    Messages: 112

    well I hope you were not going to say that now I will have to search for a big pair of channel locks to grip the metal socket and hold while I try to twist!,

    Thanks Bo
  4. Western1

    Western1 Senior Member
    from MI.
    Messages: 752

    Best off heating the nut so it just starts to glow then loosen it. Be careful of the wires.