1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Head/taillight strobes not working

Discussion in 'Strobe Lighting' started by kemmer, Jan 12, 2009.

  1. kemmer

    kemmer Senior Member
    from NJ
    Messages: 329

    Have noticed that after plowing for a while my strobes stop working. I think it is from moisture but im not sure whats getting wet. would they be affected if the connectors get wet? should i add de electrical grease? or should i seal the bulbs in addition to the gasket with silicon?

    Any ideas?
  2. groundbreakers

    groundbreakers Senior Member
    Messages: 828

    well if your power supply is in the cab .. that should be fine ... but i would check the connections at the strobe bulbs themselves .. when i installed my kit .. i didnt use the plastic connectors .. instead i just connected the metal pins together and then used heat shrinking tube and a ton of electrical tape .... so yah i would check the connections at the bulbs first ..