[chev2500plow]

I was wondering if it's a pain in the but to take off to get to the wiring for the strobe, and do you just run the wire out third brake light with a plug on it. what type of plug should i use if you use a plug any help would be great thank you.

 

[06HD BOSS]

not too hard at all. just gotta pop out the helper handles on and maybe the plastic trim, i cant remember. but the wire is right up there on the drivers side, its taped down. I wired about 5 more feet onto it and ran it to the back and down the rear pillar and out the vent in the back of the cab. i also put a 4 prong trailer disconnect on it that i have my strobes and work lights on.

 

[Crash935]

You dont have to take the whole headliner down, remove the trim pieces on the drivers side and gently pull the side of the liner down. Stick your arm straight in about where the rear of the door would be and you will find the wires. They are taped to the liner so you might have to give a little tug, just make sure that you dont have the dome light wire.