good idea

Discussion in 'Commercial Snow Removal' started by scott185, Feb 5, 2001.

  1. scott185

    scott185 Junior Member
    Messages: 10

    Thanks for the info guys, I actually have some conveyer belt
    from a local belt manufacture but it is not thick enough. I will try the junk yard. If anyone is interested I found a site related to this subject
  2. finnegan

    finnegan Senior Member
    Messages: 308

  3. Michael F

    Michael F Senior Member
    Messages: 203

    Didn't know they were studing that, thats great. Thanks hope everyone sees it.
  4. 75

    75 Addict
    Messages: 1,382

    scott185: that's a really interesting page, well worth a look. (Studies done at RPI in New York on methods of controlling/reducing snow spray off plows. Deals with the big DOT plows but the principles are the same for smaller units) By the way, another possibility for some good heavy belting is an aggregate company, usually if there are conveyors there's bound to be some old belting nearby.

    1975 GMC C-35