1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Front air dam on the 03 Chevy

Discussion in 'Chevy Trucks' started by Rasta, Feb 27, 2008.

  1. Rasta

    Rasta Junior Member
    Messages: 1

    Just picked up a 03 Chevy HD with a Fisher plow on it, the previous owner hacked the crap out of the front air dam to allow the plow to fit. It would of taken him less time to remove it than it did for him to saw it up like that.... My question is what do you guys do, remove it? Or does someone make a custom fit air dam for plows?
    They had to cut next to the area where the front toe hooks go, now the center piece of the air dam kind of just hangs there and flops around. Any options?
  2. Indy

    Indy Senior Member
    Messages: 704

    unfortunately that is how it sets up on mine. the good thing is the valances are cheap (check ebay)
  3. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239


    take it off ,look for a take off at a salvage yard ,or new to put back on if you sell the truck ,if you trim it and you have a flap in the middle drill a small hole in the middle lower lip and tie it up with a wire tie