1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fluid Film reducer/remover

Discussion in 'Eureka Fluid Film' started by 2COR517, Feb 10, 2009.

  1. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    What do you use to remove FF from a spot you don't want it?
  2. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Soap and water.
  3. Dano50

    Dano50 PlowSite.com Addict
    from CA
    Messages: 1,270

    Yeah, that's about it. You might try a warm detergent wash. What kind of spot you talking about?
  4. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

    maybe just an all purpose cleaner... i always love to use the ZEP 45
  5. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Just curious, more than anything.
  6. joyofFluidFilm

    joyofFluidFilm Senior Member
    Messages: 497

    so how did it work for you? Did the spot come off?:p
  7. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    I posted another thread about using FF on wiper blades. It seemed to work quite well, but I want to wash the actual wiping edge of the blade down. I get a very miniscule streak/film with each pass of the wiper blade, but it is not affecting visibility. I'm not even sure it's FF, to be honest. Got a storm coming tomorrow night, so I'll be spraying down the wiper arms and cowl vent to see if I can reduce the ice buildup in there too.