1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fluid Film & Electrical Problems....Fluke??

Discussion in 'Eureka Fluid Film' started by ontimeanthony, Nov 9, 2012.

  1. ontimeanthony

    ontimeanthony Junior Member
    Messages: 2

    I have a 98 Dodge Ram 2500. I recently purchased a case of Fluid Film and coated the whole underside of my truck and let it dry for a day. When I took the truck out the next day, the speedo didn't work and the check engine light came on, turns out it was a bad speed sensor which is located on the rear axle.After it was replaced I took it for a spin and noticed the trans temp guage wasn't working. It turns out it was a bad sending unit on the pan. Would Fluid Film have any effect on these components or was it just a fluke?
  2. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    They were due to fail. FF on electrical components all the time and no issues.