1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Flostat ultramount motor cap cracked?

Discussion in 'Western Plows Discussion' started by fortydegnorth, Mar 11, 2015.

  1. fortydegnorth

    fortydegnorth Senior Member
    Messages: 219

    I'm trying to fix all the little worn out things on this mvp and I noticed the motor cap is cracked. I haven't attempted to take it off because I was struggling to find one. Can anyone verify if this is the cap I may be looking for?


    Here is a pic of the worn out broken one. Everything works fine but I'd like to button this thing up.

  2. racer47

    racer47 Senior Member
    Messages: 381

    put plastic coffee can over it tape up .you will destroy motor trying to replace motor cap . you will have to replace whole motor
  3. TJS

    TJS PlowSite.com Addict
    Messages: 1,440

    50 bucks for that “water prevention” cap what a rip off. All these are supposed to do is “prevent” water from getting into the motor where it works its way past the shaft seal into the hydraulic tank. Here is a cover I made a long time ago for my pump set up. I used 10 bucks in aluminum and paint.

  4. fortydegnorth

    fortydegnorth Senior Member
    Messages: 219

    I siliconed it. :mechanic: