Snow Plowing Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a stainless 8'6" xv2 plow. Recently when I plow, I get about an hour into it. I'll be pushing a snow bank back and either the pump or motor starts making a whining sound and keeps making the sound for about 30 seconds. After that, within one or two passes all functions will stop working on the plow. I have to stop and repeatedly hit the up button. Sometimes up to 5 minutes of waiting. It does that for a while and then works fine.
 

· Registered
Joined
·
8,294 Posts
Most likely bad solenoid but for fun lets check a few things. Any blinky lights on control? Does control turn itself off? Have you checked all the fuses? Cleaned bumper connections?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top