1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Valve body

Discussion in 'Commercial Snow Removal' started by oversoul, Nov 17, 2002.

  1. oversoul

    oversoul Junior Member
    from Maine
    Messages: 4

    I still cant get this old Fisher valve body figured out.

    Now I can get it to lift and angle......but now it wont DROP!

    This thing is drivin me nuts,,,.....

    Did All old fisher valve bodies have the pressure attached to the lift side???

    I wish I had a diagram of the inside of this thing....
  2. Joe92GT

    Joe92GT Member
    Messages: 71

    I think your talking about the old valve body for the Belt driven Hydrolic pump.

    Ok... the input is on the right side, and out on the left. There are three hose connections on top. The one side of the valve body with two connections is angle left and right.. The one side with a single connection goes right to the main piston.

    The main piston only goes down when weight is pulling it down. It is not pressurized down...

    Hope this helps

    any more questions e-mail me jek3@njit.edu