1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher SD sits uneven on ground when turned

Discussion in 'Truck & Equipment Repair' started by misgur, Dec 16, 2012.

  1. misgur

    misgur Junior Member
    Messages: 22

    Hi All,

    I've got a Fisher SD 7.5 plow mounted on a 2006 F150 and I've run into this issue of the plow not sitting level on the ground when turned. I've dropped the pins so that they're now in the top hole (allowing the plow to sit lower). It does look better when the plow is turned to the left; however, when it's turned to the right, the right side of the blade is a good 2" off the ground. The blade does sit completely flat with the ground when straightened out.

    I'm wondering if there are any other adjustments I can perform to get it to sit flush with the ground while turned in either direction.

    Any input is appreciated, as always.
  2. abbe

    abbe Senior Member
    from RI
    Messages: 718

    Most likely twisted/ bent.
  3. leigh

    leigh 2000 Club Member
    from CT
    Messages: 2,342

    Twisted a-frame?
  4. extremepusher

    extremepusher Senior Member
    from west mi
    Messages: 143

    bent a-frame or check the center pin on a-frame