1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher RD Bent Rib

Discussion in 'Fisher Engineering Discussion' started by luciani634, Nov 5, 2014.

  1. luciani634

    luciani634 Member
    Messages: 60

    Bent Rib on my Fisher RD





  2. SnowGuy73

    SnowGuy73 PlowSite Fanatic
    Messages: 24,870

    Ok. Now what?
  3. Saber

    Saber Junior Member
    Messages: 21

    must of hit something hard....
  4. Banksy

    Banksy PlowSite Veteran
    Messages: 3,113

    Now weld a plate in to strengthen it.
  5. peteo1

    peteo1 PlowSite.com Addict
    Messages: 1,660

    Bet it didn't feel very good whatever it was
  6. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,288

  7. TJS

    TJS PlowSite.com Addict
    Messages: 1,440

    Not a big deal. Cut out rib from mold board and make a template and make a new one out of flat stock. A plasma cutter here works well for this but can be done with a Oxy torch set up. Also need to make a bushing for the pivot as well. Then straighten out mold board, clean up, prep for welding and weld it back in. Pretty straight forward fix.

    Once I get my CNC plasma table up and running I will be making ribs for popular plows for this exact situation.
  8. luciani634

    luciani634 Member
    Messages: 60

    Here are some more Pic

    some more Pic