1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Quick-Start won't lift?

Discussion in 'Commercial Snow Removal' started by maine-e-ac, Mar 12, 2005.

  1. maine-e-ac

    maine-e-ac Junior Member
    Messages: 1

    Fellow Plow People,
    It's snowing as I type this message. Expecting 8-14 inches.
    I hooked up my plow and the pump whines, but the blade will just not get up.
    If I go up a banking to lift the blade, the ram goes up. And stays up.
    But can't lift the blade on its own.
    The pump was already replaced a year ago. Checked fluid levels. Ok.
  2. chris k

    chris k Senior Member
    Messages: 204

    check the filter inside the pump. i have an older fisherMM that the filter needs to be cleaned twice a year. the pump will just whine.