1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Plow Troubleshooting question

Discussion in 'Fisher Engineering Discussion' started by hewlettjohn, Nov 21, 2011.

  1. hewlettjohn

    hewlettjohn Junior Member
    Messages: 2

    I am posting this for a buddy of mine:

    He has a 2001 Chevy 3500. He recently installed the on-truck parts himself. He has a 3 port, green label isolation module. When he connects to the plow and moves the controller he just gets a click at the pump on the plow.

    When I connect my truck to his plow, everything works fine.

    I am no expert but I have installed the on-truck parts on 3 of my vehicles so I have a base familiarity with the installation process. His install looks good to me for what it is worth.

    What would make the plow pump just click and not move?

    Thanks in advance for any assistance,

  2. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,613

    Check the solenoid.
  3. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,288

    check the solenoid like ford said but also check the plugs truck side and make sure they are clean of corrosion and greased as he may not be getting a good connection.Welcome to plowsite John!
  4. hewlettjohn

    hewlettjohn Junior Member
    Messages: 2

    Thanks Gentlemen. I will give it a try and post back.