1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fisher motor junk

Discussion in 'Fisher Engineering Discussion' started by smelb1, Mar 26, 2011.

  1. smelb1

    smelb1 Junior Member
    Messages: 8

    I was having problems with my fisher mm2 plow with lifting. my connections on my motor did not look to good so i decided to try to clean them. i sprayed them with pb blaster then tried to take them off. in the process i broke both of them off. then i took the motor off and there was about a inch of junk in the bottom of the motor at the base. the brushed were about 1/16" thick so it did need new brushes. there was rust all through that motor. does anyone know if mine can be rebuilt is so where can i get a rebuild kit or should i just buy a new one.
  2. NHresident

    NHresident Senior Member
    Messages: 304