1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Mm Pro Setup For Sale

Discussion in 'Used Plowing and Truck Equipment Forum' started by ALEX516, Aug 26, 2004.

  1. ALEX516

    ALEX516 Senior Member
    Messages: 103

    I have a 8 foot HD Fisher Minute Mount Plow, with snow foil, 4 years old, looks great, has normal rust spots, etc… VERY dependable setup, currently on my 2500hd diesel and I’m selling because I want to switch over to a western since all of our trucks but mine has westerns and also prefer the trip blade vs the trip edge since I plow around a lot of block driveways.

    Has a joystick controller and also have an ununsed “fish stick” hand-held controller. I don’t know too much about the wiring since it was put in profrssionally, but I know it has the “isolation module” thing in it, if that makes any sense to you.

    I’d like $2200.00 or your best offer for it. I would deliver within the NY metro area, parts of Mass. Since we have a house there.

    I’d take off all the mounts from my truck, and the harness too if wanted…

    I see the prices of these can vary greatly, so if anyone wants to make an offer, please send me a pm.

    or you can always nextel w/t me @ 172*41*1956
  2. Brother1

    Brother1 Member
    Messages: 59

    Alex - Saw your note and I have a 97 Ford F-350 with the mounts for a Fisher plow on it. We are looking for a blade for this truck but have noticed that there are only 2 connectors mounted on the grill that would connect to the plow itself. We have a 2001 Fisher plow on a Chevy pickup but there are 3 connectors on that one and we were trying to just swap out the plow blade to the Ford but now we're not sure if it will match up. Since the plow you have is a year older I was wondering if it had the same wiring as the one we had or if there was something different. If it matched up to our Ford Fisher set-up we might be interested. I'm in Westchester County so don't think we are too far. Thanks - Joe
  3. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,141

    The Isolation Module (which Alex has) uses 3 connectors in the front of the truck were as the relay type setups (which your Ford apparently has) only uses 2,they 2 types are not interchangable.
  4. ALEX516

    ALEX516 Senior Member
    Messages: 103

    3 Plugs??

    I am not sure if I am misunderstanding the previous post, or what but my plow only has two plugs from the truck to the plow.
    One is a two wire which is power and gnd. the other plug is the controlling leads and such.
    Am I missing something??
  5. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,141

    OK,you said in your post that you were sure you had the "Isolation Module thing",that particular set-up uses 3 plugs,if you only have 2 then you do not have the Isolation Module,you have the relay set-up.
  6. ALEX516

    ALEX516 Senior Member
    Messages: 103


    OK, Arc, You've got me, I for some reason, not even sure xactly why, thought that I had an isolation module on board. I can say that I do know that I have 2 plugs not 3 on the front of the trucka nd the plow.

    Sorry about the misinformation.
  7. Arc Burn

    Arc Burn PlowSite.com Addict
    Messages: 1,141

    No problem,just want to be sure someone knows what they are getting is all.
    It would make a difference in the resale as the Isolation Module uses a better harness system.