1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Min Mount 1 issues

Discussion in 'Truck & Equipment Repair' started by sdcham1, Jan 1, 2006.

  1. sdcham1

    sdcham1 Junior Member
    from boston
    Messages: 6

    I swapped out left angle piston and lines, pump is working but will not lift or angle. I do not think there is enough fluid in the system. Please help many storms coming this week need to get it running.
  2. echovalley

    echovalley Senior Member
    from CT
    Messages: 456

    Well first off make sure the piston on the headgear if fully retracted then fill the pump with fluid.You are low on fluid and have air in the system.Did it work fine before you changed the piston?

    ADMSWELDING Senior Member
    Messages: 397

    Bleed the system ,check the fluid with the lift cylinder closed as suggested that is good advice. keep us informed .