1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher HD wiring harness

Discussion in 'Fisher Engineering Discussion' started by Seaway25, Feb 11, 2011.

  1. Seaway25

    Seaway25 Senior Member
    Messages: 165

    My left plow headlight has been dim or completely off for a while. The marker lights always worked. I never plow at night so I have been ignoring it. I could wiggle the connector and make it work. At worst the marker lights would still light up, but the headlights would be out. I could still use the plow. I lost power to the plow a couple times in the last day, and again would just wiggle the plug and get it back. I finally had a chance to look at it a little closer today and one of the wires is broken right off. Now I can't get the plow to do anything without bending the plug until that wire touches.

    It's a 9ft. Fisher Minute Mount. It's has the 3 plug hook up, and a 4 spot isolation module. On the truck side 11 pin connection is where the broken wire is. It's broken right at the plug. Do I need to get the whole harness (Part #26347 11-Pin Plow Lighting Harness - http://www.centralparts.com/unassigned/Fisher-P-S-11-Pin-Lite-Hrns-E-Force/7000/ ) or is there a repair end that I can get? Or, could I possibly take that connector apart and re-use it? I have been searching around for the correct repair end and haven't had any luck. Thanks.
  2. FordFisherman

    FordFisherman PlowSite.com Addict
    from 06611
    Messages: 1,614

    They sell repair ends that will fix your problem.
  3. Seaway25

    Seaway25 Senior Member
    Messages: 165

    I thought they did, but I can't seem to find a part number for it. I have been looking here - http://parts.fisherplows.com/ The whole harness is # 104 or part # 26347. They have a couple of repair ends - # 117, but they are either a 9 or 12 pin end. According to this thread they don't make 11 pin repair ends - http://www.plowsite.com/archive/index.php/t-109773.html Any suggestions short of spending $104 on the harness - http://www.centralparts.com/unassigned/Fisher-P-S-11-Pin-Lite-Hrns-E-Force/7000/ ?
    Last edited: Feb 11, 2011
  4. buddymanzpop

    buddymanzpop Senior Member
    Messages: 603

    You might be able to find a used 11 pin harness on Ebay or CL for less money but if B&B says there is no repair end for the 11 pin as he does in that thread then I can assure you there is none. Beef up the the union of the harness and plug with heater hose and electrical tape to prevent this from happening again.
  5. Seaway25

    Seaway25 Senior Member
    Messages: 165

    I actually put the wrong part number. I need the truck side 26357 which unfortunately is little more money. I'm going to go pick one up today. Thanks for the help