Snow Plowing Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello I have an Fisher ez v plow 8’6. My issue is that the plow went up but now it won’t do anything else. Wings don’t work scoop or down non work. The motor works. I cleaned all the connections on the plugs checked fluid level still nothing.
Checked fuses under hood all good.
The only thing that it will do now is if I take the hose off and drain fluid so it goes down when I fill it back up and hit the left angle button the plow will go up.
Any help would be greatly appreciated thank you.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
Then it's a control issue.

Try opening it, there are some tiny fuses inside it that can be replaced. Be prepared to have to buy a new (expensive) controller though. The EZv controls fail frequently
Ok thank you I'll get on it. I know what you mean about the controller already checked on the price. I appreciate your help..
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top