1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher A-Frame to blade clearance

Discussion in 'Fisher Engineering Discussion' started by Super Mech, Sep 10, 2011.

  1. Super Mech

    Super Mech Member
    Messages: 51

    In the process of refurbing my 8' fsher hd plow. How much clearance should there be between the A-Frame pivot and the blade yoke? Mine seems to have quite a bit of space (1/2-5/8"). just seems like too much for my liking. I know shimming it will tighten it up but that will also affect where the blade contacts the guides on the back end of the A-Frame. Will this affect anything or should a leave it as is?
  2. Morrissey snow removal

    Morrissey snow removal PlowSite.com Addict
    Messages: 1,798

    i build the ones i repair to 1/4 space good luck