1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher 7 1/2' conventional mount/FS GM 88-98

Discussion in 'Used Plowing and Truck Equipment Forum' started by Rippem, Sep 29, 2003.

  1. Rippem

    Rippem Junior Member
    Messages: 9

    I am the original owner. I had this setup on 3 of the last Gen. fullsize for my personal use. I have installed it, and am the only one who's ever used it. I have the original belt driven pump/brackets/belts, 2 sets of cables short/long for different valve body locations ('94 down pre-vortec and 95/96 Vortec), and joystick cable control. I also have a Barnes electric/over pump, more hoses, and control for right up to the last of the old body trucks in early '99 (4 wheel anti-lock "brains" on the fenderwell and a change to serpintene belt made it impossible to run the belt pump as of '97 I think), it (the Barnes pump) will go in those trucks underhood, no problem. (We found a location/mounting that works and will be happy to tell you) I last had this plow on an early '99 GMC Sierra "Classic". Everything I have has always been kept inside, I have waxed and/or oiled the blade religiously. The paint is excellent front and back. The trip edge is excellent. I have painted the headgear and push once 4 years ago, and it's just getting a little rust again (I use a sprayer of WD-40 regularly to ward off rust). The blade has one flaw, I caught a shoe backing over the sidewalk in my back yard 5 years ago, and bent the right side shoe collar forward slightly. Otherwise, absolutely no damage to this rig ever. We've all seen junk....this isn't it! $1500 for everything. I need a plow for my new H.D. I am an hour north of Syracuse N.Y. Thanks.
    Last edited: Sep 29, 2003
  2. foyboy41

    foyboy41 Member
    Messages: 38


    is there anyway you would seperate the electric pump setup ?????????
  3. Rippem

    Rippem Junior Member
    Messages: 9

    Everything has been sold...Thank You